Electronics Engineering and Research
EMI/EMC Test and Measurement Print
EMI/EMC TEST AND MEASUREMENT
3M FERRITE TILED SHIELDED SEMI - ANECHOIC CHAMBER:
Features:
- E-field Shielding better than 100 dB from 30 MHz.
Applications:
- Radiated emission and susceptibility of electrical or electronics product can be measured upto 6GHz.
Users:
- Industries in and around Kolkata and Eastern India.
Location of facility:
- SAMEER Kolkata Centre, Sector V, Salt Lake Electronics Complex.
RADIATED EMISSION MEASUREMENT FACILITY:
Service Name:
- Measurement of Radiated emission from electrical or electronic product as per CISPR 11, 32 & FCC part 15 standards.
Features:
- Measurement distance can be set 3mtr and Rx antenna height can be varied from 1 to 4mtr. 360º azimuth rotation of the EUT can be given.
Applications:
- Electrical or electronics product with input current less than 20A.
Users:
- Industries in and around Kolkata and Eastern India.
Location of facility:
- SAMEER Kolkata Centre, Sector V, Salt Lake Electronics Complex.
Other Detail:
- Facility is FCC listed. Radiated emission can be measured from 30MHz to 6 GHz.
RADIATED SUSCEPTIBILITY TEST FACILITY:
Service name:
- Radiated susceptibility test of electrical or electronic product as per IEC 61000-4-3 standard.
Features:
- Measurement distance can be set 3mtr and Field upto 10 V/M can be created on the EUT. Field uniformity better than 6dB for 75% or more test points.
Applications:
- Electrical or electronics product with input current less than 20A.
Users:
- Industries in and around Kolkata and Eastern India.
Location of facility:
- SAMEER Kolkata Centre, Sector V, Salt Lake Electronics Complex.
Other Detail:
- Radiated Susceptibility can be test from 80MHz to 6 GHz
MAGNETIC FIELD IMMUNITY TEST FACILITY:
Service Name:
- Magnetic field Immunity test of electrical or electronic product as per IEC 61000-4-8 standard.
Features:
- Field Immunity can be tested at 50Hz. Severity level can be upto 300 A/m for continuous and upto 1000 A/m for short duration.
Applications:
- Electronics product with CRT display with input current less than 20A.
Users:
- Industries in and around Kolkata and Eastern India.
Location of facility:
- SAMEER Kolkata Centre, Sector V, Salt Lake Electronics Complex.
Other Detail:
- Immunity can be tested at power line frequency and field strength upto 5 Gauss.
CONDUCTED EMISSION MEASUREMENT FACILITY:
Service Name:
- Measurement of conducted emission from electrical or electronic product as per CISPR 11, 32 & FCC part 15 standards.
Features:
- Conducted emission measurement of 3 phase EUT is possible and input current upto 25A.
Applications:
- Electrical or electronics product.
Users:
- Industries in and around Kolkata and Eastern India.
Location of facility:
- SAMEER Kolkata Centre, Sector V, Salt Lake Electronics Complex.
Other Detail:
- Conducted Emission can be measured from 150KHz to 30MHz and also as per FCC standard.
ELECTRO STATIC DISCHARGE TEST FACILITY:
Service name:
- ESD test of electrical or electronic product as per IEC 61000-4-2 standard.
Features:
- The severity level for air discharge is upto ±15 KV and contact discharge is upto ±8 KV. Pulse rise time is between 0.7nS to 1nS.
Applications:
- Electronic equipment sensitive to static discharge.
Users:
- Railway vendors and other Industries in and around Kolkata and Eastern India.
Location of facility:
- SAMEER Kolkata Centre, Sector V, Salt Lake Electronics Complex.
Other Detail:
- ESD test of EUT can be carried out upto ±15 KV (air discharge).
ELECTRICAL FAST TRANSIENT / BURST TEST FACILITY:
Service name:
- EFT/Burst test of electrical or electronic product as per IEC 61000-4-4 standard.
Features:
- Pulse Rise time is 5 nS, Pulse width is 50 nS, Burst duration is 15 mS, Burst Period is 300 mS and Test voltage upto ± 4 KV
Applications:
- Electrical or electronic equipment with input current less than 16A.
Users:
- Railway vendors and other Industries in and around Kolkata and Eastern India.
Location of facility:
- SAMEER Kolkata Centre, Sector V, Salt Lake Electronics Complex.
Other Detail:
- EFT/Burst of EUT can be carried out upto ±4 KV and upto 5 KHz repetition rate.
HIGH ENERGY SURGE IMMUNITY TEST FACILITY:
Service Name:
- High energy surge immunity test of electrical or electronic product as per IEC 61000-4-5 standard.
Features:
- Pulse Rise time is 1.2 µS, Pulse width is 50 µS and Test voltage upto ± 4 KV.
Applications:
- Electrical or electronic equipment with input current less than 16A.
Users:
- Railway vendors and other Industries in and around Kolkata and Eastern India.
Location of facility:
- SAMEER Kolkata Centre, Sector V, Salt Lake Electronics Complex.
Other Detail:
- Surge generator can deliver 1.2/50µS voltage surge across high load resistance and 8/20µS current surge into a short circuit.
SLOW DAMP OSCILLATORY TEST FACILITY:
Service Name:
- Measurement of slow damp oscillatory test of electrical or electronic product as per IEC 61000-4-18 standard.
Features:
- Voltage Rise time is 75 nS, voltage oscillation frequency 100kHz and 1MHz.
Applications:
- Electrical or electronic equipment with input current less than 16A.
Users:
- Railway vendors and other Industries in and around Kolkata and Eastern India.
Location of facility:
- SAMEER Kolkata Centre, Sector V, Salt Lake Electronics Complex.
Other Detail:
- Slow damp oscillatory wave of EUT can be carried out upto ±1KV (line-line) and ±2KV (line-ground).
VOLTAGE DIPS, SHORT INTERRUPTION AND VOLTAGE VARIATION IMMUNITY TEST FACILITY:
Service Name:
- Measurement of Voltage dips, short interruption and voltage variation immunity test of electrical or electronic product as per IEC 61000-4-11 standard.
Features:
- Voltage dips short interruption 0%, 40%, 70% & and 80%.
Applications:
- Electrical or electronic equipment with input current less than 16A.
Users:
- Railway vendors and other Industries in and around Kolkata and Eastern India.
Location of facility:
- SAMEER Kolkata Centre, Sector V, Salt Lake Electronics Complex.
Other Detail:
- Voltage dips short interruption 0%, 40%, 70% & and 80%.
CONDUCTED SUSCEPTIBILITY TEST FACILITY:
Service Name:
- Conducted susceptibility test of electrical or electronic product as per IEC 61000-4-6 standard.
Features:
- The 10VRMS can be created on the EUT.
Applications:
- Electrical or electronics product with input current less than 20A.
Users:
- Industries in and around Kolkata and Eastern India.
Location of facility:
- SAMEER Kolkata Centre, Sector V, Salt Lake Electronics Complex.
Other Detail:
- Conducted Susceptibility can be test from 150kHz to 80MHz.
- Tariff chart for EMI/EMC Tests & Measurements - NEW
Note : Charges for consultancy services is considered on case to case basis